SKU: CAT1-P015-79407563
Reducing Adaptor with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Standards
ISO9261, ISO
INQUIRY FOR:
Reducing Adaptor
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| 79407563 | 79407563 | 79407563 |
|
| 79409075 | 79409075 | 79409075 |
|
| 79409063 | 79409063 | 79409063 |
|
| 794011063 | 794011063 | 794011063 |
|
| 79402521 | 79402521 | 79402521 |
|
| 79402522 | 79402522 | 79402522 |
|
Reducing Adaptor is identified in the catalogue under Tubing fittings, with the recorded role “irrigation connection component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. The site uses CAT1-P015-79407563 as an internal catalogue reference; it is not presented as a manufacturer model.
The resolved source fields include 79407563 — Catalogue size, 79409075 — Catalogue size, 79409063 — Catalogue size, 794011063 — Catalogue size, 79402521 — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| 79407563 — Catalogue size | 75*63 |
| 79409075 — Catalogue size | 90*75 |
| 79409063 — Catalogue size | 90*63 |
| 794011063 — Catalogue size | 110*63 |
| 79402521 — Catalogue size | 2.5"2" |
| 79402522 — Catalogue size | 2.5"2" |
The source distinguishes 6 technical variants, including 79407563, 79409075, 79409063, 794011063, 79402521. The complete matrix remains the authority for row-level comparison. Read the value and unit together. A blank characteristic is intentionally omitted rather than estimated from a photo or a similar listing.
Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.
Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.
Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.
Site conditions can change the installation method, so the project procedure and confirmed item documentation remain necessary.
Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.
Separate cleaning, adjustment and replacement decisions in the service record so the next inspection can evaluate what changed.
For a precise enquiry, state the product name Reducing Adaptor, reference CAT1-P015-79407563, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point 79407563 — Catalogue size: 75*63.
Use the Tubing fittings category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
