1 / 2SKU: XF1301-16
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Puncher
| Parameter | Value |
|---|---|
| Gross weight (kg) | 14.5 |
| Holediameter | 15mm |
| Outer packing (L x W x H cm) | 54 x 36 x 29 |
| Quantity per carton (pcs) | 100 |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| XF1301-16 | XF1301-16 | XF1301-16 |
|
Puncher is catalogued under Punch for irrigation installation or service item duties. The description keeps recorded technical data separate from selection advice, allowing the exact item or variant to be checked first. The printed catalogue model reference is XF1301-16.
The resolved source fields include Gross weight (kg), Holediameter, Outer packing (L × W × H cm), Quantity per carton (pcs). Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Gross weight (kg) | 14.5 |
| Holediameter | 15mm |
| Outer packing (L × W × H cm) | 54 x 36 x 29 |
| Quantity per carton (pcs) | 100 |
The source distinguishes 1 technical variant, including XF1301-16. The complete matrix remains the authority for row-level comparison. Each displayed value stays attached to this canonical product record. Do not transfer it to another visually similar item.
Match the recorded working size, interface or operation to the exact pipe, emitter or fitting being serviced. A tool that looks similar can produce a different hole or joint, so confirm the catalogue reference before use.
Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.
Inspect the workpiece and tool before use, support the component and follow the site method for alignment and personal protection. Test the result on a representative offcut when the project procedure calls for it.
Do not commission the entire system from a visual match. Verify one representative assembly, document observations and resolve any mismatch first.
Keep working edges and interfaces clean, inspect for wear or deformation and store the item so its operating surface is protected. Replace a damaged tool instead of compensating with extra force.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Puncher, reference XF1301-16, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Gross weight (kg): 14.5.
Use the Punch category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.
IRRINEX irrigation installation tool. Diameter: 20-110; Size: 20mm-125mm. An installation tool is selected for the fitting or pipework task identified by this listing. Tool size and the intended component must be matched before use.
IRRINEX irrigation hole punch tool. size: 16mm,20mm,25mm,32mm; carton size: 47X36X41. A hole punch makes openings for irrigation take-off connections. The required hole dimension and the compatible pipe or hose should be confirmed separately.
IRRINEX irrigation hole punch tool. Diameter: 3mm-25mm; Size: 3mm 4mm 8mm 10mm 12mm 15mm 16mm 20mm 25mm. A hole punch makes openings for irrigation take-off connections. The required hole dimension and the compatible pipe or hose should be confirmed separately.
IRRINEX irrigation hole punch tool. Size: 16mm. A hole punch makes openings for irrigation take-off connections. The required hole dimension and the compatible pipe or hose should be confirmed separately.
