Puncher

Puncher is identified in the catalogue under Punch, with the recorded role “irrigation installation or service item”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. The printed catalogue model reference is XF1301-06.

Verified catalogue information

The resolved source fields include Gross weight (kg), Hole diameter, Outer packing (L × W × H cm), Quantity per carton (pcs). Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 1 technical variant, including XF1301-06. The complete matrix remains the authority for row-level comparison. These rows are identity evidence, not a substitute for project calculations. Unlisted characteristics require written confirmation.

What to verify before selection

Match the recorded working size, interface or operation to the exact pipe, emitter or fitting being serviced. A tool that looks similar can produce a different hole or joint, so confirm the catalogue reference before use.

Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.

Planning installation and first use

Inspect the workpiece and tool before use, support the component and follow the site method for alignment and personal protection. Test the result on a representative offcut when the project procedure calls for it.

Site conditions can change the installation method, so the project procedure and confirmed item documentation remain necessary.

Service checks and record keeping

Keep working edges and interfaces clean, inspect for wear or deformation and store the item so its operating surface is protected. Replace a damaged tool instead of compensating with extra force.

When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.

Information needed for product confirmation

For a precise enquiry, state the product name Puncher, reference XF1301-06, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Gross weight (kg): 15.

Use the Punch category to compare related product types and maintain a clear internal path from category research to this specification page. A concise schedule of codes, quantities and open questions gives both engineering and procurement teams an auditable basis for review.