punch
Hole Saw Opener Drill Bit High Speed Steel Cutter Tool For Metal Plastic
The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
SS
SKU: XF1301-05
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Puncher
| Parameter | Value |
|---|---|
| Gross weight (kg) | 14 |
| HoleDiameter | 8mm10mm |
| Outer packing (L x W x H cm) | 54 x 35 x 28 |
| Quantity per carton (pcs) | 200 |
| Technical data | 12mm |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| XF1301-05 | XF1301-05 | XF1301-05 |
|
Puncher is identified in the catalogue under Punch, with the recorded role “irrigation installation or service item”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. The printed catalogue model reference is XF1301-05.
The resolved source fields include Gross weight (kg), Hole diameter, Outer packing (L × W × H cm), Quantity per carton (pcs), Technical data. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Gross weight (kg) | 14 |
| Hole diameter | 8mm10mm |
| Outer packing (L × W × H cm) | 54 x 35 x 28 |
| Quantity per carton (pcs) | 200 |
| Technical data | 12mm |
The source distinguishes 1 technical variant, including XF1301-05. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.
Match the recorded working size, interface or operation to the exact pipe, emitter or fitting being serviced. A tool that looks similar can produce a different hole or joint, so confirm the catalogue reference before use.
Record the selected code in drawings and the enquiry. That small step keeps later substitutions visible and makes technical review more reliable.
Inspect the workpiece and tool before use, support the component and follow the site method for alignment and personal protection. Test the result on a representative offcut when the project procedure calls for it.
Site conditions can change the installation method, so the project procedure and confirmed item documentation remain necessary.
Keep working edges and interfaces clean, inspect for wear or deformation and store the item so its operating surface is protected. Replace a damaged tool instead of compensating with extra force.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Puncher, reference XF1301-05, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Gross weight (kg): 14.
Use the Punch category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.
The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
Φ4 Plastic Hole Punch with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.