punch
Hole Saw Opener Drill Bit High Speed Steel Cutter Tool For Metal Plastic
The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
SS
SKU: XF1301-04
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Puncher
| Parameter | Value |
|---|---|
| Gross weight (kg) | 14 |
| Hole Diameter | 3mm 6mm |
| Outer packing (L x W x H cm) | 54 x 35 x 28 |
| Quantity per carton (pcs) | 250 |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| XF1301-04 | XF1301-04 | XF1301-04 |
|
Puncher is catalogued under Punch for irrigation installation or service item duties. The description keeps recorded technical data separate from selection advice, allowing the exact item or variant to be checked first. The printed catalogue model reference is XF1301-04.
The resolved source fields include Gross weight (kg), Hole diameter, Outer packing (L × W × H cm), Quantity per carton (pcs). Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Gross weight (kg) | 14 |
| Hole diameter | 3mm 6mm |
| Outer packing (L × W × H cm) | 54 x 35 x 28 |
| Quantity per carton (pcs) | 250 |
The source distinguishes 1 technical variant, including XF1301-04. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.
Match the recorded working size, interface or operation to the exact pipe, emitter or fitting being serviced. A tool that looks similar can produce a different hole or joint, so confirm the catalogue reference before use.
Record the selected code in drawings and the enquiry. That small step keeps later substitutions visible and makes technical review more reliable.
Inspect the workpiece and tool before use, support the component and follow the site method for alignment and personal protection. Test the result on a representative offcut when the project procedure calls for it.
Photograph the installed reference and record the chosen technical row after the test; this reduces ambiguity during future service.
Keep working edges and interfaces clean, inspect for wear or deformation and store the item so its operating surface is protected. Replace a damaged tool instead of compensating with extra force.
Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.
For a precise enquiry, state the product name Puncher, reference XF1301-04, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Gross weight (kg): 14.
Use the Punch category to compare related product types and maintain a clear internal path from category research to this specification page. Keep commercial questions separate from the technical checklist so the confirmed item identity remains clear in subsequent correspondence.
The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
Φ4 Plastic Hole Punch with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Puncher with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.