Puncher

Puncher is documented in the Punch category for its role as irrigation installation or service item. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. Printed catalogue model references include XF1301-03A14mM, XF1301-03A3mM, XF1301-03A4mM, XF1301-03A6mM, XF1301-03A8mM; use the technical matrix to keep each code with its own values.

Catalogue facts for this item

The resolved source fields include Outer packing (L × W × H cm), Quantity per carton (pcs), XF1301-03A14mM — Hole diameter, XF1301-03A14mM — Gross weight (kg), XF1301-03A3mM — Hole diameter. Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 5 technical variants, including XF1301-03A14mM, XF1301-03A3mM, XF1301-03A4mM, XF1301-03A6mM, XF1301-03A8mM. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.

Selection checks before specification

Match the recorded working size, interface or operation to the exact pipe, emitter or fitting being serviced. A tool that looks similar can produce a different hole or joint, so confirm the catalogue reference before use.

Start with the duty point, then eliminate variants whose recorded fields do not match. This prevents a familiar name from overriding the actual technical row.

Planning installation and first use

Inspect the workpiece and tool before use, support the component and follow the site method for alignment and personal protection. Test the result on a representative offcut when the project procedure calls for it.

Site conditions can change the installation method, so the project procedure and confirmed item documentation remain necessary.

Maintenance points to plan

Keep working edges and interfaces clean, inspect for wear or deformation and store the item so its operating surface is protected. Replace a damaged tool instead of compensating with extra force.

Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.

Preparing an accurate B2B enquiry

For a precise enquiry, state the product name Puncher, reference XF1301-03A14mM, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Outer packing (L × W × H cm): 50 x 33 x 24.

Use the Punch category to compare related product types and maintain a clear internal path from category research to this specification page. A concise schedule of codes, quantities and open questions gives both engineering and procurement teams an auditable basis for review.