Drip Irrigation Hole Punch Tool

Puncher belongs to the Punch range; its recorded role is irrigation installation or service item. Catalogue values are shown explicitly, and characteristics absent from the source are not added. Printed catalogue model references include XF1301-01A, XF1301-01B, XF1301-01C; use the technical matrix to keep each code with its own values.

Catalogue facts for this item

The resolved source fields include Gross weight (kg), Hole diameter, Outer packing (L × W × H cm), XF1301-01A — Quantity per carton (pcs), XF1301-01B — Hole diameter. Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 3 technical variants, including XF1301-01A, XF1301-01B, XF1301-01C. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.

What to verify before selection

Match the recorded working size, interface or operation to the exact pipe, emitter or fitting being serviced. A tool that looks similar can produce a different hole or joint, so confirm the catalogue reference before use.

Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.

Planning installation and first use

Inspect the workpiece and tool before use, support the component and follow the site method for alignment and personal protection. Test the result on a representative offcut when the project procedure calls for it.

Do not commission the entire system from a visual match. Verify one representative assembly, document observations and resolve any mismatch first.

Service checks and record keeping

Keep working edges and interfaces clean, inspect for wear or deformation and store the item so its operating surface is protected. Replace a damaged tool instead of compensating with extra force.

Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.

What to include in a technical enquiry

For a precise enquiry, state the product name Puncher, reference XF1301-01A, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Gross weight (kg): 14.

Use the Punch category to compare related product types and maintain a clear internal path from category research to this specification page. Attach drawings or connection photographs when they affect identification, and ask for a written response to every open compatibility point.