Pressure Compensated Sprinkler

Pressure Compensated Sprinkler is identified in the catalogue under Micro sprinkler, with the recorded role “water-distribution component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. Printed catalogue model references include PCS01A, PCS01B, PCS01C, PCS02A, PCS02B; use the technical matrix to keep each code with its own values.

Catalogue facts for this item

The resolved source fields include Overall Dimensions, PCS01A — Nozzle Color, PCS01A — Connection, PCS01B — Nozzle Color, PCS01B — Connection. Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 9 technical variants, including PCS01A, PCS01B, PCS01C, PCS02A, PCS02B. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.

How to select the correct variant

Compare every listed inlet or connection, pressure, discharge, nozzle and spraying-radius value with the hydraulic design. Use the technical variant row that matches the required duty point; a similar product shape is not evidence of equal performance.

Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.

Planning installation and first use

Confirm upstream filtration, lateral spacing, mounting orientation and available pressure before installation. Flush the line first, fit the specified connection without forcing it, and test one representative zone while observing the catalogue operating values.

Photograph the installed reference and record the chosen technical row after the test; this reduces ambiguity during future service.

Maintenance points to plan

Inspect the nozzle or water path for deposits, check rotation or movement only where that feature is shown, and compare field discharge with the selected catalogue row. Clean with a method compatible with the actual component and replace damaged parts rather than enlarging an orifice.

Separate cleaning, adjustment and replacement decisions in the service record so the next inspection can evaluate what changed.

What to include in a technical enquiry

For a precise enquiry, state the product name Pressure Compensated Sprinkler, reference PCS01A, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Overall Dimensions: 57×85 mm.

Use the Micro sprinkler category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.