SKU: V25E
Offtake Valve for PE Pipe with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Standards
ISO, ISO9261
INQUIRY FOR:
Offtake Valve for PE Pipe
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| V25E | V25E | V25E |
|
| V28E | V28E | V28E |
|
| V32E | V32E | V32E |
|
Offtake Valve for PE Pipe is catalogued under Bypass valve for irrigation water-conveyance component duties. The description keeps recorded technical data separate from selection advice, allowing the exact item or variant to be checked first. Printed catalogue model references include V25E, V28E, V32E; use the technical matrix to keep each code with its own values.
The resolved source fields include V25E — Catalogue size, V28E — Catalogue size, V32E — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| V25E — Catalogue size | 25 |
| V28E — Catalogue size | 28 |
| V32E — Catalogue size | 32 |
The source distinguishes 3 technical variants, including V25E, V28E, V32E. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.
Compare every listed diameter, wall, length, spacing, connection and pressure field with the hydraulic and installation design. Select one exact variant row and verify compatibility with its fittings; similar nominal names may hide different dimensions.
Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.
Store, cut, join and support the item according to the confirmed product type and project method. Keep internal surfaces clean, avoid twisting or point loads, and test the completed section before burial, covering or full operation.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Inspect exposed runs, joints and terminations for abrasion, movement, leakage or deformation. Keep the exact dimension and variant in maintenance records, and investigate the system cause before replacing a damaged section.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Offtake Valve for PE Pipe, reference V25E, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point V25E — Catalogue size: 25.
Use the Bypass valve category to compare related product types and maintain a clear internal path from category research to this specification page. Keep commercial questions separate from the technical checklist so the confirmed item identity remains clear in subsequent correspondence.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Diameter: 16mm; Size: 16mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
