SKU: CT0316A
Offtake for Hose Spiral Body with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Offtake for Hose Spiral Body
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| CT0316A | CT0316A | CT0316A |
|
| CT0320A | CT0320A | CT0320A |
|
Offtake for Hose Spiral Body is documented in the Lock nut fitting category for its role as irrigation water-conveyance component. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. Printed catalogue model references include CT0316A, CT0320A; use the technical matrix to keep each code with its own values.
The resolved source fields include CT0316A — Catalogue size, CT0320A — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| CT0316A — Catalogue size | 16 |
| CT0320A — Catalogue size | 20 |
The source distinguishes 2 technical variants, including CT0316A, CT0320A. The complete matrix remains the authority for row-level comparison. Each displayed value stays attached to this canonical product record. Do not transfer it to another visually similar item.
Compare every listed diameter, wall, length, spacing, connection and pressure field with the hydraulic and installation design. Select one exact variant row and verify compatibility with its fittings; similar nominal names may hide different dimensions.
Start with the duty point, then eliminate variants whose recorded fields do not match. This prevents a familiar name from overriding the actual technical row.
Store, cut, join and support the item according to the confirmed product type and project method. Keep internal surfaces clean, avoid twisting or point loads, and test the completed section before burial, covering or full operation.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Inspect exposed runs, joints and terminations for abrasion, movement, leakage or deformation. Keep the exact dimension and variant in maintenance records, and investigate the system cause before replacing a damaged section.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Offtake for Hose Spiral Body, reference CT0316A, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point CT0316A — Catalogue size: 16.
Use the Lock nut fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
