SKU: CAT1-P014-BT031710
Lock Tee for Pipe with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Lock Tee for Pipe
| Parameter | Value |
|---|---|
| Catalog Size | 16 |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| Catalogue Page 14 Lock Tee Visual Configuration — Size 16 | — | — |
|
Lock Tee for Pipe is documented in the Lock nut fitting category for its role as irrigation water-conveyance component. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. The site uses CAT1-P014-BT031710 as an internal catalogue reference; it is not presented as a manufacturer model.
The resolved source fields include Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Catalogue size | 16 |
The source distinguishes 1 technical variant, including Catalogue Page 14 Lock Tee Visual Configuration — Size 16. The complete matrix remains the authority for row-level comparison. These rows are identity evidence, not a substitute for project calculations. Unlisted characteristics require written confirmation.
Compare every listed diameter, wall, length, spacing, connection and pressure field with the hydraulic and installation design. Select one exact variant row and verify compatibility with its fittings; similar nominal names may hide different dimensions.
Start with the duty point, then eliminate variants whose recorded fields do not match. This prevents a familiar name from overriding the actual technical row.
Store, cut, join and support the item according to the confirmed product type and project method. Keep internal surfaces clean, avoid twisting or point loads, and test the completed section before burial, covering or full operation.
Photograph the installed reference and record the chosen technical row after the test; this reduces ambiguity during future service.
Inspect exposed runs, joints and terminations for abrasion, movement, leakage or deformation. Keep the exact dimension and variant in maintenance records, and investigate the system cause before replacing a damaged section.
A maintenance note should identify the exact code, location and symptom. That evidence is more useful than a generic request for a similar part.
For a precise enquiry, state the product name Lock Tee for Pipe, reference CAT1-P014-BT031710, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Catalogue size: 16.
Use the Lock nut fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Keep commercial questions separate from the technical checklist so the confirmed item identity remains clear in subsequent correspondence.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
