SKU: LT0217S
Lock Ring Tee for Hose Small Body with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Lock Ring Tee for Hose Small Body
| Parameter | Value |
|---|---|
| Catalog Size | 16 |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| LT0217S | LT0217S | LT0217S |
|
Lock Ring Tee for Hose Small Body is documented in the Lock ring fitting category for its role as irrigation water-conveyance component. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. The printed catalogue model reference is LT0217S.
The resolved source fields include Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Catalogue size | 16 |
The source distinguishes 1 technical variant, including LT0217S. The complete matrix remains the authority for row-level comparison. Read the value and unit together. A blank characteristic is intentionally omitted rather than estimated from a photo or a similar listing.
Compare every listed diameter, wall, length, spacing, connection and pressure field with the hydraulic and installation design. Select one exact variant row and verify compatibility with its fittings; similar nominal names may hide different dimensions.
Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.
Store, cut, join and support the item according to the confirmed product type and project method. Keep internal surfaces clean, avoid twisting or point loads, and test the completed section before burial, covering or full operation.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Inspect exposed runs, joints and terminations for abrasion, movement, leakage or deformation. Keep the exact dimension and variant in maintenance records, and investigate the system cause before replacing a damaged section.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Lock Ring Tee for Hose Small Body, reference LT0217S, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Catalogue size: 16.
Use the Lock ring fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Attach drawings or connection photographs when they affect identification, and ask for a written response to every open compatibility point.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
