SKU: LT020A
Lock Ring Male Tee with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Lock Ring Male Tee
| Parameter | Value |
|---|---|
| Catalog Size | 16*1/2*16 |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| LT020A | LT020A | LT020A |
|
Lock Ring Male Tee is identified in the catalogue under Lock ring fitting, with the recorded role “irrigation connection component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. The printed catalogue model reference is LT020A.
The resolved source fields include Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Catalogue size | 16*1/2*16 |
The source distinguishes 1 technical variant, including LT020A. The complete matrix remains the authority for row-level comparison. These rows are identity evidence, not a substitute for project calculations. Unlisted characteristics require written confirmation.
Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.
Record the selected code in drawings and the enquiry. That small step keeps later substitutions visible and makes technical review more reliable.
Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.
Photograph the installed reference and record the chosen technical row after the test; this reduces ambiguity during future service.
Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.
Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.
For a precise enquiry, state the product name Lock Ring Male Tee, reference LT020A, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Catalogue size: 16*1/2*16.
Use the Lock ring fitting category to compare related product types and maintain a clear internal path from category research to this specification page. A concise schedule of codes, quantities and open questions gives both engineering and procurement teams an auditable basis for review.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
