SKU: LT01620
Lock Ring Male Elbow with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Lock Ring Male Elbow
| Parameter | Value |
|---|---|
| Catalog Size | 16*1/2" |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| LT01620 | LT01620 | LT01620 |
|
Lock Ring Male Elbow belongs to the Lock ring fitting range; its recorded role is irrigation connection component. Catalogue values are shown explicitly, and characteristics absent from the source are not added. The printed catalogue model reference is LT01620.
The resolved source fields include Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Catalogue size | 16*1/2" |
The source distinguishes 1 technical variant, including LT01620. The complete matrix remains the authority for row-level comparison. These rows are identity evidence, not a substitute for project calculations. Unlisted characteristics require written confirmation.
Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.
Start with the duty point, then eliminate variants whose recorded fields do not match. This prevents a familiar name from overriding the actual technical row.
Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Lock Ring Male Elbow, reference LT01620, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Catalogue size: 16*1/2".
Use the Lock ring fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Keep commercial questions separate from the technical checklist so the confirmed item identity remains clear in subsequent correspondence.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
