SKU: TB01620
Lock Nut Male Elbow with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Lock Nut Male Elbow
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| TB01620 | TB01620 | TB01620 |
|
| TB01620 | TB01620 | TB01620 |
|
Lock Nut Male Elbow is catalogued under Lock nut fitting for irrigation connection component duties. The description keeps recorded technical data separate from selection advice, allowing the exact item or variant to be checked first. The printed catalogue model reference is TB01620.
The resolved source fields include TB01620 — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| TB01620 — Catalogue size | 16*1/2” |
| TB01620 — Catalogue size | 20*1/2'' |
The source distinguishes 2 technical variants, including TB01620, TB01620. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.
Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.
If a required field is absent, place it in the enquiry as a question. Silence in the catalogue is not a positive or negative specification.
Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.
A maintenance note should identify the exact code, location and symptom. That evidence is more useful than a generic request for a similar part.
For a precise enquiry, state the product name Lock Nut Male Elbow, reference TB01620, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point TB01620 — Catalogue size: 16*1/2”.
Use the Lock nut fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
