SKU: VAL-LMT
Lock Male Thread Valve for Tape with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Standards
ISO, ISO9261
INQUIRY FOR:
Lock Male Thread Valve for Tape
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| V16G | V16G | V16G |
|
| V16H | V16H | V16H |
|
| V20G | V20G | V20G |
|
| V20H | V20H | V20H |
|
| V16G1 |
Lock Male Thread Valve for Tape is identified in the catalogue under Mini valve, with the recorded role “irrigation flow-control component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. Printed catalogue model references include IRRINEXV16H, IRRINEXV20G, IRRINEXV20H, V16G, V16G1; use the technical matrix to keep each code with its own values.
The resolved source fields include V16G — Catalogue size, V16H — Catalogue size, V20G — Catalogue size, V20H — Catalogue size, V16G1 — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| V16G — Catalogue size | 16*1/2" |
| V16H — Catalogue size | 16*3/4" |
| V20G — Catalogue size | 20*1/2" |
| V20H — Catalogue size | 20*3/4" |
| V16G1 — Catalogue size | 16*1/2" |
| V16H1 — Catalogue size | 16*3/4" |
| Catalogue Page 17 Lock Male Thread Valve Configuration — 16×1/2 inch — Catalogue size | 16×1/2 inch |
| IRRINEXV16H — Catalogue size | 16×3/4 inch |
| IRRINEXV20G — Catalogue size | 20×1/2 inch |
| IRRINEXV20H — Catalogue size | 20×3/4 inch |
The source distinguishes 10 technical variants, including V16G, V16H, V20G, V20H, V16G1. The complete matrix remains the authority for row-level comparison. Each displayed value stays attached to this canonical product record. Do not transfer it to another visually similar item.
Compare connection size, valve form, operating method and every catalogue pressure or flow value with the system requirement. Where variants differ, keep the selected code and its row together throughout design, purchasing and installation.
Start with the duty point, then eliminate variants whose recorded fields do not match. This prevents a familiar name from overriding the actual technical row.
Confirm flow direction only from a verified marking or document, support adjacent pipework and keep debris out of the sealing path. Commission the valve gradually and check the assembled section under the project test procedure.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Cycle or inspect the operating mechanism according to site practice, watch for leakage and verify that control parts move without forcing. Record the exact variant before replacing an actuator, seal or complete valve.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Lock Male Thread Valve for Tape, reference VAL-LMT, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point V16G — Catalogue size: 16*1/2".
Use the Mini valve category to compare related product types and maintain a clear internal path from category research to this specification page. Attach drawings or connection photographs when they affect identification, and ask for a written response to every open compatibility point.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
| V16G1 |
| V16G1 |
|
| V16H1 | V16H1 | V16H1 |
|
|---|
| Catalogue Page 17 Lock Male Thread Valve Configuration — 16×1/2 inch | — | — |
|
|---|
| IRRINEXV16H | IRRINEXV16H | IRRINEXV16H |
|
|---|
| IRRINEXV20G | IRRINEXV20G | IRRINEXV20G |
|
|---|
| IRRINEXV20H | IRRINEXV20H | IRRINEXV20H |
|
|---|
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
