SKU: LFC1625
Lock Female Thread with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
INQUIRY FOR:
Lock Female Thread
| Parameter | Value |
|---|---|
| Catalog Size | 16*3/4"F |
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| LFC1625 | LFC1625 | LFC1625 |
|
Lock Female Thread is identified in the catalogue under Lock nut fitting, with the recorded role “irrigation connection component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. The printed catalogue model reference is LFC1625.
The resolved source fields include Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| Catalogue size | 16*3/4"F |
The source distinguishes 1 technical variant, including LFC1625. The complete matrix remains the authority for row-level comparison. Each displayed value stays attached to this canonical product record. Do not transfer it to another visually similar item.
Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.
Record the selected code in drawings and the enquiry. That small step keeps later substitutions visible and makes technical review more reliable.
Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.
Site conditions can change the installation method, so the project procedure and confirmed item documentation remain necessary.
Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.
A maintenance note should identify the exact code, location and symptom. That evidence is more useful than a generic request for a similar part.
For a precise enquiry, state the product name Lock Female Thread, reference LFC1625, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Catalogue size: 16*3/4"F.
Use the Lock nut fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Keep commercial questions separate from the technical checklist so the confirmed item identity remains clear in subsequent correspondence.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
