L-Compression Male Adaptor is identified in the catalogue under Pp compression fitting, with the recorded role “irrigation connection component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. Printed catalogue model references include N704020, N704021, N704024, N704025, N704026; use the technical matrix to keep each code with its own values.
Catalogue facts for this item
The resolved source fields include Body Material, Clinching Ring Material, Maximum Working Pressure for 20-63 mm at 20°C, Maximum Working Pressure for 75-110 mm at 20°C, Nut / Blocking Bush Material. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|
| Body Material | PP-B |
|---|
| Clinching Ring Material | POM |
|---|
| Maximum Working Pressure for 20-63 mm at 20°C | 16 bar |
|---|
| Maximum Working Pressure for 75-110 mm at 20°C | 10 bar |
|---|
| Nut / Blocking Bush Material | PP |
|---|
| O-Ring Material | EPDM |
|---|
| Reference Standards | UNI 9561-2,DIN 8076,ISO 14236,BRL-K03 |
|---|
| N704020 — Pipe Diameter | 20 |
|---|
| N704020 — Male Thread | 1/2'' |
|---|
| N704020 — Package Quantity (carton icon; unit not stated) | 650 |
|---|
| N704021 — Pipe Diameter | 20 |
|---|
| N704021 — Male Thread | 3/4'' |
|---|
The source distinguishes 21 technical variants, including N704020, N704021, N704024, N704025, N704026. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.
How to select the correct variant
Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.
If a required field is absent, place it in the enquiry as a question. Silence in the catalogue is not a positive or negative specification.
Installation checks for the project
Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.
Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.
Service checks and record keeping
Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.
A maintenance note should identify the exact code, location and symptom. That evidence is more useful than a generic request for a similar part.
Information needed for product confirmation
For a precise enquiry, state the product name L-Compression Male Adaptor, reference N704020, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Body Material: PP-B.
Use the Pp compression fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Attach drawings or connection photographs when they affect identification, and ask for a written response to every open compatibility point.
