L-Compression End Cap

L-Compression End Cap is documented in the Pp compression fitting category for its role as irrigation connection component. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. Printed catalogue model references include N705020, N705025, N705032, N705040, N705050; use the technical matrix to keep each code with its own values.

Verified catalogue information

The resolved source fields include Body Material, Clinching Ring Material, Maximum Working Pressure for 20-63 mm at 20°C, Maximum Working Pressure for 75-110 mm at 20°C, Nut / Blocking Bush Material. Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 9 technical variants, including N705020, N705025, N705032, N705040, N705050. The complete matrix remains the authority for row-level comparison. Each displayed value stays attached to this canonical product record. Do not transfer it to another visually similar item.

What to verify before selection

Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.

Record the selected code in drawings and the enquiry. That small step keeps later substitutions visible and makes technical review more reliable.

Installation and commissioning guidance

Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.

Keep the selected code with the installation record. It provides a traceable basis for troubleshooting and later replacement.

Service checks and record keeping

Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.

Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.

Information needed for product confirmation

For a precise enquiry, state the product name L-Compression End Cap, reference N705020, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Body Material: PP-B.

Use the Pp compression fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Attach drawings or connection photographs when they affect identification, and ask for a written response to every open compatibility point.