L-Compression 90° Elbow

L-Compression 90° Elbow is identified in the catalogue under Pp compression fitting, with the recorded role “irrigation connection component”. The page is structured for rapid model, variant and specification verification before an enquiry is prepared. Printed catalogue model references include N706020, N706025, N706032, N706040, N706050; use the technical matrix to keep each code with its own values.

Verified catalogue information

The resolved source fields include Body Material, Clinching Ring Material, Maximum Working Pressure for 20-63 mm at 20°C, Maximum Working Pressure for 75-110 mm at 20°C, Nut / Blocking Bush Material. Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 9 technical variants, including N706020, N706025, N706032, N706040, N706050. The complete matrix remains the authority for row-level comparison. These rows are identity evidence, not a substitute for project calculations. Unlisted characteristics require written confirmation.

Selection checks before specification

Match connection form, nominal size, thread or tube interface and any recorded pressure value to both mating components. Dimensions and labels in one technical row belong together; appearance alone cannot confirm interchangeability.

Start with the duty point, then eliminate variants whose recorded fields do not match. This prevents a familiar name from overriding the actual technical row.

Planning installation and first use

Prepare tube ends and mating surfaces according to the actual connection type. Keep parts aligned, use the correct insertion depth or thread practice, avoid unsupported tightening assumptions, and pressure-test the assembled section under the project procedure.

Photograph the installed reference and record the chosen technical row after the test; this reduces ambiguity during future service.

Inspection and maintenance guidance

Inspect for movement, leakage, damaged threads, distorted sealing areas and pipe stress. Identify the exact size and variant before replacement, and do not reuse a damaged sealing element merely because the fitting still connects.

Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.

Preparing an accurate B2B enquiry

For a precise enquiry, state the product name L-Compression 90° Elbow, reference N706020, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point Body Material: PP-B.

Use the Pp compression fitting category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.