IrriNex 200 ft Quick-Connect Drip Irrigation System Kit with 1/4-inch Tubing provides a specified drip irrigation system kit for raised beds, lawns, and cooling and misting. The documented configuration covers 200 ft, 50 ft, 6 mm, 1/4-inch, and 32 pieces. For IrriNex 200 ft Quick-Connect Drip Irrigation System Kit with 1/4-inch Tubing, package facts stay separate from site-dependent advice, so listed dimensions and quantities are not confused with results that vary by installation.

How is this drip irrigation system kit configured?

Documented configuration: Configured with 200 ft, 50 ft, 6 mm, and 1/4-inch for layout and compatibility planning before installation begins. Package contents: Lists 32 pieces for component and layout planning before installation. For raised beds, lawns, and cooling and misting, check the listed dimensions and quantities together so tubing size or outlet style is not hidden by total length.

Which product-specific facts support this configuration?

What package facts are listed for 6 mm?

Documented contents include 6 mm. Compare those quantities and component types with the planned yards and gardens layout so required branches and end points are accounted for before ordering.

How does the documented 50 ft connection fit?

The documented interface uses 50 ft and drip outlets. Before fitting it into a raised beds, lawns, and cooling and misting layout, verify dimensions at the water source and keep the first assembled connection accessible for inspection.

What operating data is listed for adjustable watering outlets?

Listed operating information includes adjustable watering outlets and 360-degree outlet adjustment. These values describe the product configuration for cooling and misting; final distribution still depends on inlet conditions, elevation, routing and simultaneous outlet demand.

Where is this drip irrigation system kit best used?

Connection design: For the 200 ft format, quick-connect fittings simplify assembly; correct tubing dimensions, square cuts and a leak test are still required. System commissioning: Commission the 200 ft arrangement by testing near and distant points, then correct leaks, kinks or blocked outlets before scheduling. For raised beds, lawns, and cooling and misting, map the source, main route, branch points and final outlets before cutting tubing. Test the most distant point to decide whether the 200 ft, 50 ft, 6 mm, 1/4-inch, and 32 pieces layout should remain one zone.

How can this drip irrigation system kit remain serviceable?

Application fit: The 200 ft format for IRK-B991KF suits raised beds, lawns, and cooling and misting; match coverage to the layout and water supply. Keep the raised beds, lawns, and cooling and misting route free of debris and sharp bends. After assembling the listed 200 ft, 50 ft, 6 mm, 1/4-inch, and 32 pieces configuration, run a short cycle and correct loose joints or uneven end-point delivery.

How do purchase options work for IrriNex 200 ft Quick-Connect Drip Irrigation System Kit with 1/4-inch Tubing?

The selectable configurations are 200 ft / 32 pieces, 7.8in, 100ft, 50ft, and with timer. Each option for IrriNex 200 ft Quick-Connect Drip Irrigation System Kit with 1/4-inch Tubing retains its documented price and associated product images. For IrriNex 200 ft Quick-Connect Drip Irrigation System Kit with 1/4-inch Tubing, product price and the fixed $4.99 shipping charge remain separate. For IRK-B991KF, compare included dimensions and controls rather than length alone.