Irrigation Valve Boxes

Irrigation Valve Boxes belongs to the Irrigation valves range; its recorded role is irrigation flow-control component. Catalogue values are shown explicitly, and characteristics absent from the source are not added. Printed catalogue model references include XF3051-06", XF3052-10A", XF3053-12", XF3054-14"; use the technical matrix to keep each code with its own values.

Catalogue facts for this item

The resolved source fields include XF3051-06" — Size, XF3051-06" — Top diameter, XF3051-06" — Bottom diameter, XF3051-06" — Height, XF3051-06" — Maximum working pressure. Values and units below are transcribed from the reviewed catalogue record.

The source distinguishes 4 technical variants, including XF3051-06", XF3052-10A", XF3053-12", XF3054-14". The complete matrix remains the authority for row-level comparison. These rows are identity evidence, not a substitute for project calculations. Unlisted characteristics require written confirmation.

Selection checks before specification

Compare connection size, valve form, operating method and every catalogue pressure or flow value with the system requirement. Where variants differ, keep the selected code and its row together throughout design, purchasing and installation.

Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.

Planning installation and first use

Confirm flow direction only from a verified marking or document, support adjacent pipework and keep debris out of the sealing path. Commission the valve gradually and check the assembled section under the project test procedure.

Do not commission the entire system from a visual match. Verify one representative assembly, document observations and resolve any mismatch first.

Service checks and record keeping

Cycle or inspect the operating mechanism according to site practice, watch for leakage and verify that control parts move without forcing. Record the exact variant before replacing an actuator, seal or complete valve.

Trend observations over time rather than waiting for a complete failure. Changes can then be checked against hydraulic, mechanical or operational causes.

Preparing an accurate B2B enquiry

For a precise enquiry, state the product name Irrigation Valve Boxes, reference XF3051-06", required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point XF3051-06" — Size: 6".

Use the Irrigation valves category to compare related product types and maintain a clear internal path from category research to this specification page. A concise schedule of codes, quantities and open questions gives both engineering and procurement teams an auditable basis for review.