SKU: CAT1-P015-792032
Hose Tee with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Standards
ISO9261, ISO
INQUIRY FOR:
Hose Tee
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| 792032 | 792032 | 792032 |
|
| 792040 | 792040 | 792040 |
|
| 792050 | 792050 | 792050 |
|
| 792063 | 792063 | 792063 |
|
| 792075 |
Hose Tee is documented in the Tubing fittings category for its role as irrigation water-conveyance component. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. The site uses CAT1-P015-792032 as an internal catalogue reference; it is not presented as a manufacturer model.
The resolved source fields include 792032 — Catalogue size, 792040 — Catalogue size, 792050 — Catalogue size, 792063 — Catalogue size, 792075 — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| 792032 — Catalogue size | 32 |
| 792040 — Catalogue size | 40 |
| 792050 — Catalogue size | 50 |
| 792063 — Catalogue size | 63 |
| 792075 — Catalogue size | 75 |
| 792090 — Catalogue size | 90 |
| 7920110 — Catalogue size | 110 |
The source distinguishes 7 technical variants, including 792032, 792040, 792050, 792063, 792075. The complete matrix remains the authority for row-level comparison. The table contains source-backed values only. Project limits and compatibility still need to be checked against the complete system.
Compare every listed diameter, wall, length, spacing, connection and pressure field with the hydraulic and installation design. Select one exact variant row and verify compatibility with its fittings; similar nominal names may hide different dimensions.
Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.
Store, cut, join and support the item according to the confirmed product type and project method. Keep internal surfaces clean, avoid twisting or point loads, and test the completed section before burial, covering or full operation.
Site conditions can change the installation method, so the project procedure and confirmed item documentation remain necessary.
Inspect exposed runs, joints and terminations for abrasion, movement, leakage or deformation. Keep the exact dimension and variant in maintenance records, and investigate the system cause before replacing a damaged section.
Separate cleaning, adjustment and replacement decisions in the service record so the next inspection can evaluate what changed.
For a precise enquiry, state the product name Hose Tee, reference CAT1-P015-792032, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point 792032 — Catalogue size: 32.
Use the Tubing fittings category to compare related product types and maintain a clear internal path from category research to this specification page. A concise schedule of codes, quantities and open questions gives both engineering and procurement teams an auditable basis for review.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
| 792075 |
| 792075 |
|
| 792090 | 792090 | 792090 |
|
|---|
| 7920110 | 7920110 | 7920110 |
|
|---|
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
