SKU: CAT1-P015-790032
Hose Coupling with catalogue-backed technical fields clearly documented. Compare the exact record, variant and project requirements before a technical enquiry.
Standards
ISO, ISO9261
INQUIRY FOR:
Hose Coupling
Use the model and item code below to confirm the exact configuration in your inquiry.
| Variant / Size | Model | Item code | Technical parameters |
|---|---|---|---|
| 790032 | 790032 | 790032 |
|
| 790040 | 790040 | 790040 |
|
| 790050 | 790050 | 790050 |
|
| 790063 | 790063 | 790063 |
|
| 790075 |
Hose Coupling is documented in the Tubing fittings category for its role as irrigation water-conveyance component. This page leads with catalogue evidence so engineers and buyers can identify the item before discussing commercial terms. The site uses CAT1-P015-790032 as an internal catalogue reference; it is not presented as a manufacturer model.
The resolved source fields include 790032 — Catalogue size, 790040 — Catalogue size, 790050 — Catalogue size, 790063 — Catalogue size, 790075 — Catalogue size. Values and units below are transcribed from the reviewed catalogue record.
| Catalogue field | Recorded value |
|---|---|
| 790032 — Catalogue size | 32 |
| 790040 — Catalogue size | 40 |
| 790050 — Catalogue size | 50 |
| 790063 — Catalogue size | 63 |
| 790075 — Catalogue size | 75 |
| 790090 — Catalogue size | 90 |
| 7900110 — Catalogue size | 110 |
The source distinguishes 7 technical variants, including 790032, 790040, 790050, 790063, 790075. The complete matrix remains the authority for row-level comparison. Read the value and unit together. A blank characteristic is intentionally omitted rather than estimated from a photo or a similar listing.
Compare every listed diameter, wall, length, spacing, connection and pressure field with the hydraulic and installation design. Select one exact variant row and verify compatibility with its fittings; similar nominal names may hide different dimensions.
Use the catalogue table as a comparison checklist and document every assumption outside it for supplier review before ordering.
Store, cut, join and support the item according to the confirmed product type and project method. Keep internal surfaces clean, avoid twisting or point loads, and test the completed section before burial, covering or full operation.
Do not commission the entire system from a visual match. Verify one representative assembly, document observations and resolve any mismatch first.
Inspect exposed runs, joints and terminations for abrasion, movement, leakage or deformation. Keep the exact dimension and variant in maintenance records, and investigate the system cause before replacing a damaged section.
When a part is removed, compare its markings and dimensions with the recorded variant before accepting a replacement.
For a precise enquiry, state the product name Hose Coupling, reference CAT1-P015-790032, required quantity, destination, selected technical row and the project values that must be confirmed. Include the recorded comparison point 790032 — Catalogue size: 32.
Use the Tubing fittings category to compare related product types and maintain a clear internal path from category research to this specification page. Before approval, compare the supplier response with this catalogue evidence and record any accepted deviation explicitly.
IRRINEX irrigation connection fitting. Size: 16mm. A connection fitting joins or terminates selected irrigation components. Choose the named fitting form and match both sides of the connection.
| 790075 |
| 790075 |
|
| 790090 | 790090 | 790090 |
|
|---|
| 7900110 | 7900110 | 7900110 |
|
|---|
IRRINEX compression pipe fitting. Working pressure: 1.0-1.6Mpa (10-25bar); size: 20mm1/2"-110mmx4"; Connection: Male. A compression fitting joins a matched pipe to the selected connection. Check each pipe and thread dimension for the exact fitting configuration.
IRRINEX irrigation valve. Size: 16mm, 20mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
IRRINEX irrigation valve. Size: 25mm 28mm 32mm. An irrigation valve forms part of the system's flow-control arrangement. The named valve form and its actual connections should be checked before choosing a configuration.
