1 / 2SKU: DRT-FLT
Ruban plat à paroi mince pour irrigation de cultures en rangs à coût réduit.
Matériau
PE
Gamme de Tailles
16/20mm
Pression
0.04 - 0.15 MPa
Normes
ISO9261
DEMANDE POUR:
Ruban Goutte à Goutte Plat
| Paramètre | Valeur |
|---|---|
| Wall Thickness | 0.15 / 0.20 / 0.25mm |
| Dripper Spacing | 10 / 20 / 30 / 40cm |
| Flow Rate | 0.8/2.2/3.1L/h |
| Operating Pressure | 0.04 - 0.15MPa |
| Diameter | 16mm |
| Roll Length | 1000 / 2000 / 3000 / 5000m |
| Customuzed Support | OEM/ODM |
Patch-type ruban goutte à goutte plat puts eau exactly where roots need it — not on the surface, not lost to evaporation. Built for row crops and grand fields, it delivers uniforme débit even in low-pression systèmes. A fiable choice for farms in arid or eau-scarce regions where every liter counts.
Every meter of this ruban goutte à goutte is made from PE. It handles fertilizers and harsh field conditions without degrading, rolls out across uneven ground without kinking, and lasts through multiple seasons of outdoor use.
Tolerates fertilizers, pesticides, and both acidic and alkaline eau. Performance stays constant across different soil chemistries and fertigation programs.
UV-stabilized against sunlight and temperature swings. Suitable for permanent open-field installation without seasonal removal.
Emitters are built into the tape wall, not attached separately. Constant débit along the full length, with lower risk of detachment or clogging.
Bends around rows and uneven ground without cracking. Easy to roll out, reposition, and store — no special tools required.
PE keeps material costs down without sacrificing durability. A practical option for grande échelle farms where tape runs hundreds or thousands of meters.
Recoverable at end of service life. Many agricole plastique recycling programs accept PE tape, reducing irrigation waste sent to landfill.
Ruban goutte à goutte plat is a simple product, but the details matter at scale. These are the seven things our customers constantly rely on.
High-strength PE holds up through seasons of field use. Stores compactly and lays flat during installation.
Works with standard fertigation programs. Resistant to corrosion from acidic or alkaline solutions.
Patch emitters distribute débit evenly at each outlet, delivering eau to the root zone rather than the surface between rows.
Lightweight and rollable. Adapts to different row spacings and terrain with minimal labor and no special equipment.
Fiable performance at a price that works for grand fields. Reduced eau use offsets the initial investment quickly.
UV-stabilized PE handles sun, rain, and temperature changes without cracking or losing flexibility.
PE is recoverable at end of service life, supporting agricole plastique recycling and reducing field waste.
Ruban goutte à goutte is straightforward to set up, but a few things — pression, filtration, soil type — have an outsized effect on how long it lasts and how evenly it performs.
Lay tape in straight, evenly spaced rows at or just below the soil surface for direct root-zone distribution.
Patch emitters need stable pression. Install a pression regulator — fluctuations reduce débit uniformeity and can damage the tape.
Sand, silt, and organic particles clog emitters quickly. A quality upstream filtre is essential — clean or replace it regularly.
High mineral content, pH extremes, or suspended solids shorten tape life. Test your eau before a full installation.
Sandy soils need closer spacing; clay soils can use wider intervals. Match the spec to your field's absorption rate, not just crop type.
Cap all tape ends. Inspect every connection before the first run — petit leaks drop pression across the whole line.
Before each growing season, flush the système and check for blockages, cracks, or pression drops.
In high-sun environments, confirm the tape carries UV stabilization. Factor in local temperature range when selecting wall thickness.
Select emitter spacing and tape length based on crop type, row spacing, and irrigation cycle to ensure even coverage.
Constant outlet pression matters especially on longer runs. Pression drops at the far end are a common cause of uneven irrigation.
Ruban goutte à goutte cylindrique avec émetteurs à flux turbulent pour une distribution uniforme.
