IrriNex 230 pi kit de brumisation à raccord rapide avec tube de 1/2 po

IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing provides a specified garden misting and cooling kit for raised beds, vegetable gardens, greenhouses, lawns, and patios and planters. The documented configuration covers 230 ft, 197 ft, 33 ft, 1/2-inch, and 1/4-inch. For IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing, package facts stay separate from site-dependent advice, so listed dimensions and quantities are not confused with results that vary by installation.

How is this garden misting and cooling kit configured?

Documented configuration: Configured with 230 ft, 197 ft, 33 ft, and 1/2-inch for layout and compatibility planning before installation begins. Package contents: Lists a coordinated component set, tees, end closures, and faucet adapters for component and layout planning before installation. Match the documented 230 ft, 197 ft, 33 ft, 1/2-inch, and 1/4-inch format to the water source, branch plan and number of serviceable watering points before ordering.

Which product-specific facts support this configuration?

What package facts are listed for 230 ft?

Documented contents include 230 ft, 197 ft, 33 ft, 1/4-inch, 1/2-inch, quick-connect fittings, and faucet or hose connection. Compare those quantities and component types with the planned cooling and misting layout so required branches and end points are accounted for before ordering.

Which control details are documented for quick-connect fittings?

The control record specifies quick-connect fittings for yards and gardens. Establish a short test cycle first, then set duration or frequency only after every connected point has been checked under site conditions.

What operating data is listed for misting outlets?

For hydraulic planning, the documented facts are misting outlets. Actual results across vegetable gardens, flower beds, and cooling and misting should be confirmed after assembly because pressure loss and branch count are installation-specific.

How should its raised beds, vegetable gardens, greenhouses, lawns, and patios and planters application be evaluated?

Connection design: For the 230 ft format, quick-connect fittings simplify assembly; correct tubing dimensions, square cuts and a leak test are still required. System commissioning: Commission the 230 ft arrangement by testing near and distant points, then correct leaks, kinks or blocked outlets before scheduling. Place the documented 230 ft, 197 ft, 33 ft, 1/2-inch, and 1/4-inch format onto the actual raised beds, vegetable gardens, greenhouses, lawns, and patios and planters plan before assembly. For IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing, use distance, elevation and simultaneous demand to decide whether one route or separate zones are practical.

How should IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing be installed and commissioned?

Application fit: The 230 ft format for IRK-4FTBGH suits raised beds, vegetable gardens, and greenhouses; match coverage to the layout and water supply. Confirm the supply connection for the 230 ft, 197 ft, 33 ft, 1/2-inch, and 1/4-inch layout, cut tubing squarely and flush open lines before fitting small outlets; then start flow gradually and compare near and distant points.

How do purchase options work for IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing?

IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing has one purchase configuration. No unnecessary variant selector is shown for its documented 230 ft, 197 ft, 33 ft, 1/2-inch, and 1/4-inch format. For IrriNex 230 ft Quick-Connect Garden Misting and Cooling Kit with 1/2-inch Tubing, product price and the fixed $4.99 shipping charge remain separate. For IRK-4FTBGH, compare included dimensions and controls rather than length alone.